High Finned Tubes
Various sectors rely on the high-quality high finned tubes from Airco-Fin. They form a crucial part in the production of air-cooled heat exchangers, where basically these high finned tubes provide the transfer of heat. With more than 40 years of experience in the production of (high) finned tubes, Airco-Fin knows what it is talking about when it comes to the application of this quality product. In addition to high finned tubes, we also offer you low finned tubes. Our technical advisors are happy to tell you more about the differences between the two products. On this page you can read more about the application and production of our high finned tubes. Are you already using it in your production process?
Application of our high finned tubes
As already mentioned, Airco-Fin’s high finned tubes are used, among other things, in the production of air-cooled heat exchangers. High finned tubes basically consist of a metal tube, surrounded by an aluminum strip or sometimes copper strip. This strip can be applied in different ways. A distinction is made, among others, between a type L, a type KL, a type LL, a type G (= embedded) or a type extruded. With extruded finning the fins are produced our of an aluminium tube instead of aluminium strip. The metal tube can be made of different types of metal, depending on the intended application of the high finned tubes. Within a heat exchanger, the hot medium runs through the finned tubes and heats the tube and the aluminium fins. The metal tube heats up, after which it transfers its heat to the aluminum fins. These fins then ensure that the heat is transferred into the ambient air.
High finned tubes of high quality
Supplying high finned tubes of high quality is our priority. For example, we only use raw materials from trusted European suppliers. Where possible, we draw on our own stocks of raw materials. Before starting to process these raw materials, we correctly adjust the machines in our production park. After a first small batch of high finned tubes has been produced, we perform a quality check. Where necessary, we adjust the settings of the machines in order to improve the quality of the end product. Even after the last high finned tube rolls off the conveyor belt, we check the quality of the parts. Only when it meets our high standards, we proceed to pack the high finned tubes in special racks and wooden cases. This prevents the parts from being damaged during transport.
Years of experience in production of high finned tubes
Airco-Fin has more than 40 years of experience in the production of, among other things, high finned tubes. We use this experience to continuously improve our product and to further innovate our production process where possible. Not only do we benefit from the accumulated experience, our consultants are happy to use this experience to inform our customers in various sectors about the application of our high finned tubes in the production of air-cooled heat exchangers. One of the advantages we offer you as a trusted supplier of high finned tubes is the fact that we can supply parts largely from our own stock. The delivery time is therefore limited.
More information on our high finned tubes?
Are you using high finned tubes in your production process, or do you intend to do so in the near future? Our advisors help you on your way by looking together to see which Airco-Fin product suits your needs. They are also happy to tell you more about the quality requirements we set for our products and the way in which we inspect them before they are delivered to our customers. Does this satisfy you? In that case, we will be happy to prepare a non-binding offer for you.